Featured
- Get link
- X
- Other Apps
Factory Connection Spring Weight Calculator
Factory Connection Spring Weight Calculator. Custom spring end options to meet your needs. This is to give you a guideline of what spring rate you need, there are other variables that may require you to need a softer or firmer spring rate.

Up to 2.0 inches bar stock. Thanks for checking out our spring chart page! After you find your spring, check out out our fork springs and shock springs.
Springs Are Not Changed To Tune The Suspension Stiffer Or Softer.
Multiply mean diameter (d) by 3.1415 (pi). Unlike some of our competitor. Looking for a more accurate calculation based on your bike kinematics?
Springs Are To Carry The Weight Of The Rider With The Suspension In The Correct Part Of.
I ordered springs from race tech years ago based on their online chart and they weren't close. After you find your spring, check out out our fork springs and shock springs. Sometimes the standard spring rate isn't correct.
Determine Mean Diameter (D) Add One Wire Diameter To The Inner Diameter Or Subtract One Wire Diameter From The Outer Diameter.
Make sure the spring is not under. Please include the following information: (extended length measurement) set the bike on level ground, be sure the gas tank is at least 3/4 full.
Sometimes Kg And N Are Mixed Up.
I set up a 250sx 2 weeks ago for a guy @218lbs with 5.0kg and got 35mm static, 105mm race sag with 7mm spring preload. I know different companies setup suspension differently but the race tech site suggests 5.3 and says i have a 5.3 where as factory connection says i have a 5.5 and suggests a 5.6 who's right. Includes the rider and anything else added to the bike;
Please Find Your Spring Rate Using The Tables Below.
I would have to agree that the racetech calculator seems to be incorrect. Measure with a caliper (single wire) or a tape measure (10…20 loops). Spring rate, also known as spring constant, is the constant amount of force or spring rate of force it takes an extension or compression spring to travel an inch of distance or, in the metric system of measurement, a millimeter of distance.the units of measurement of rate in the english system are, lbf/in (pounds of force per inch) or n/mm (newtons per millimeter) in the.
Comments
Post a Comment